Do It Yourself Today!
        Free Home Improvement Advice and Tips.


Home                       Submit Article                         Find a Contractor                        Tools                          Home Loans                      Home Plans

 

Air Conditioning
Bathrooms
Cabinets
Carpet
Chimneys
Concrete
Countertops
Decks
Decorating
Doors
Driveways
Drywall

Electrical
Energy Savings
Fences
Fireplaces
Floors
Gardens
Garage Doors
Gutters
Heating
Insects
Inspections
Insulation
Kitchen
Landscaping
Lawns
Lighting
Miscellaneous
Painting/Staining
Patio
Plumbing
Remodeling
Retaining Walls
Roofing
Security Systems
Siding
Stucco 
Trade Shows
Wallpaper
Windows

 

 

 

 

Skip Troweling Method for Textured Ceilings 

 StarbucksStore.com

 

 

 

 

 

 

 
 

There are several ceiling texture choices to choose from when finishing a room. You can simply apply a flat paint to the ceiling, or spray or roll on a popcorn textured ceiling. However both these choices seem to be waning in popularity to the Skip Toweled look. The Skip Troweled look provides a compromise between the flat painted ceiling and the popcorn ceiling. It provides texture but to a lesser extent than a traditional popcorn ceiling.

Skip Troweling is relatively simple to do and can be performed by a homeowner who is doing a home addition project.

Skip Troweling should be performed after the sheetrock, mudding and taping are complete. Skip Troweling simply involves applying water downed Joint Compound onto the ceiling and running a trowel over it once.

 
To Skip Trowel a ceiling, simply water down a batch of Joint Compound to a soupy consistency. Then using a trowel (the pros use a sprayer for large areas) simply spread the material onto the ceiling.

Note that this is a very messy job as there will be significant spillage and dripping. Consequently protect yourself and your floors with eye-protection and plastic on the floors.

If the Joint Compound is of the right consistency the material applied onto the ceiling will begin to form stalactites that dangle from the ceiling. Not too worry as this is what you want to occur.

After the joint compound has begun to dry somewhat, use your trowel to knock off the high points (the stalactites). To do this, simply run your trowel over the now partially stiff joint compound area. The completed surface will have a mottled look.

Let the Joint Compound completely dry then paint the ceiling using a roller.

When employing the Skip Trowel method you can get creative by adding fine sand to the Joint Compound mixture before applying to the ceilings, or by moving the Trowel in a swirling pattern when applying the compound. In addition, some of the pros actually mix paint with the soupy Joint Compound mixture to eliminate the need for applying paint after the material has dried.

About The Author

Over the past 20+ years Mark Donovan has been involved with building homes and additions to homes. His projects have included: building a vacation home, building additions and garages on to existing homes, and finishing unfinished homes. For more home improvement information visit http://www.homeadditionplus.com and http://www.homeaddition.blogspot.com.

Provided by:  www.articlecity.com
 


 

Related Tips and Advice:

Decorate with Stucco
All about Plastering
Ceiling Stucco Spray
Stucco Veneziano Walls
Working on Plaster Walls
Venetian Plasters
Skip Troweling Methods
Decorative Plaster
How To Apply Stucco

 

 

 

Contact Us        Terms of Use        Privacy Policy        Resources       Sitemap        Our Blog      Add A Link

Copyright 2007 - 2008 ©,  J. Holt & Associates, All Rights Reserved