Do It Yourself Today!
 
Free Home Improvement Advice and Tips.


Home                       Submit Article                         Find a Contractor                        Tools                          Home Loans                      Home Plans

 

 

Air Conditioning
Bathrooms
Cabinets
Carpet
Chimneys
Concrete
Countertops
Decks
Decorating
Doors
Driveways
Drywall

Electrical
Energy Savings
Fences
Fireplaces
Floors
Gardens
Garage Doors
Gutters
Heating
Insects
Inspections
Insulation
Kitchen
Landscaping
Lawns
Lighting
Miscellaneous
Painting/Staining
Patio
Plumbing
Remodeling
Retaining Walls
Roofing
Security Systems
Siding
Stucco 
Trade Shows
Wallpaper
Windows

 

 

 

 

Google
 

 

 

 

 

 

 

 
 

 

Rain Gutters - How To Install Rain Gutters And Downspouts

 

One of the many joys of being a homeowner is installing or maintaining your gutters and downspouts. Well, if you're looking for some basic tips on how to install rain gutters this article should give you some good pointers.

What Is Your Slope Angle?

The first thing you want to do is find the slope on your eaves. Where does the water flow?

Once you know this aspect, you can take a line-level and stretch it across your eave and mark off the high point on one side and the low point on the other.
 

You want the slope of the guttering to be 1/4" - 3/8" for every 10 feet. Anything less and you run the risk of water not draining properly. Once you have the marks made, you can go back with a chalk line and snap off the reference line.

Cut The Gutters

Use a measuring tape to mark off the desired length of your gutter and mark it off. Be sure to mark it all the way around the outside of the gutter.

Next, cut it off to the right length. There are several ways to go about accomplishing this, but I recommend a good pair of tin snips. Using a saw can be done, but the end result will not be pretty. Wear gloves when working with aluminum gutters because of very sharp edges.

Attach The Guttering

Now it's time to attach the gutter to your eaves. For this you will use hanging brackets that hold up the rain gutter and screw into the fascia board on the roof.

When attaching the brackets it is recommended to space them out 24" throughout the length of your gutter and 6" from the ends.

Downspouts

The final piece on how to install rain gutters will be your downspout. You will need to install a sleeve section to the end of the gutter that will also attach to the downspout.

Take the sleeve and draw an outline around it in your gutter. Next, cut out the hole using a drill to cut out an opening and then a jigsaw to cut out the hole. Take a tube of silicone and seal all the edges around the opening to prevent water leaks.

Screw the pieces together with metal screws and cut the downspout to size. Put on the end caps and seal them with your silicone. You also want to do this in any seams as well.

You can check for leaks by using a water hose and squirting water on your roof.

This was only a brief overview on how to install a rain gutter, but it should give you the help you need to make this task a little more manageable. It's really not as hard as it may look to install your own gutters and downspouts.

About the Author: By the way, you can learn more about How To Install Gutters And Downspouts as well as much more information on all types of gutters and downspouts at http://www.GuttersA-z.com
 


Search for Foreclosures Nationwide.

 Find Roofing, Siding & Gutter Service Contractors. Get Up to 4 Quotes Now. It's Quick, Free, and Easy!

 

Related Tips and Advice:

Gutter Helmet - Does Gutter Helmet Work Or Is It All Hype?
Gutter And Downspout Cleaning - Why It's So Important
Don't Forget Your Gutters!
The Truth About Gutter Covers And Gutter Guards
Rain Gutters - How To Install Rain Gutters And Downspouts
All About Copper Gutters
Easy Rain Gutter Maintenance Tips
Good Water Drainage For Your Home
How To Install Rain Gutters On Your House

 

 

 
 

Contact Us        Terms of Use        Privacy Policy        Resources       Sitemap        Our Blog      Add A Link

Copyright 2007 - 2009 ©,  J. Holt & Associates, All Rights Reserved