|
|
|
|
|
Air Conditioning
|
How To Install A Chimney Liner |
|
||
|
A chimney liner will deteriorate over the years.
When that happens you're looking at replacing the entire chimney or installing
a chimney liner. Because of the cost and time involved, most people opt for
replacing the chimney liner. Replacement liners come in two types - rigid or
flexible. They are made of steel and are usually cylindrical shaped. You
should opt for the widest liner that will fit your chimney for maximum air
flow. Before you get started you'll need to measure for the chimney liner. Measure from the bottom area you'll be connecting to up to the top of the chimney crown, adding an extra foot. 1. First, you'll need to remove the chimney cap. The liner needs to be installed by pulling it up from the fireplace. You'll need to set up a winch at the top of the chimney or you could have a couple of people on top to physically pull it up. This can be tricky depending on the chimney. 2. Drop a line from the winch down into the chimney. The chimney liner needs to be attached to the line and winched up through the chimney. Make sure to keep it centered. 3. At the base of the liner a plate needs to be screwed in to it to keep it in place. 4. After the bottom is secured the top needs to be anchored. Cut any excess liner. Use silicone caulk on the chimney crown. Attach the top plate and press it down into the caulking. Attach the clamp around the liner to secure it. |
|
|||
|
5. To ensure proper heating, the liner should be insulated. You could use a insulated blanket or pour down insulation. It will help prevent creosote from building up as it will keep the condensation down. These are the general steps involved in installing a chimney liner. They are not intended to replace the manufacturers instructions.
|
||||
|
Find Brick & Stone Contractors. Get Up to 4 Quotes Now. It's Quick, Free, and Easy!
Related Advice and Tips:
|
||||
|
| ||||
|
Contact Us
Terms of Use
Privacy Policy
Resources
Sitemap
Our Blog
Add A Link |
||||
